Plumbing Maintenance Checklist - 6 Important Components to Look For
Do you know the last time you had your plumbing system inspected? If it’s been a while, you may be at risk of developing blowouts or leaks. You need to call a plumbing expert for a comprehensive preventive maintenance call. Your plumbing contractor will most likely have a plumbing maintenance checklist.
Plumbing Maintenance Checklist
In this article, we’ll discuss what you can expect on a plumbing maintenance checklist. That way, you’ll have a rough idea of the items to be checked during a maintenance service call.
Benefits of Plumbing Maintenance Checklist
Whenever you hire a plumber to inspect your pipes for age, corrosion and wear and tear, always confirm that they have a checklist. A plumbing maintenance checklist helps to ensure your entire system in thoroughly inspected and that nothing is missed. It can also be used to compile a comprehensive report at the end of the maintenance service call.
A proactive maintenance checklist needs to cover all the essential components of your plumbing system, including drains, water heater, valves and pipes.
Every plumbing maintenance checklist should include a check for active leaks including, the presence of mildew, puddles or moisture. If you have unrepaired or unknown water leaks, that could lead to plenty of lost water.
Signs of Corrosion
The inspection should check for signs of corrosion on all visible plumbing pipes and the presence of limescale around shower heads and water faucets. Signs of significant corrosion point to pipes that are near the end of their useful lives.
The water pressure in your building should be no lower than 40 psi and no higher than 80 psi. Multiple story buildings typically have lower water pressure at higher levels and higher water pressure on the lower levels. Too much water pressure can damage your pipes while water pressure that’s too low may result in resident complaints.
Check Valves For Correct Operation
Any broken valves in your plumbing system should be replaced and the safety and shut off valves need to be tested for correct operation. This ensures that in the event of a major blowout, you’re able to turn off the water to certain sections of the building rather than turning off the building’s entire water system.
Inspect Water Heater
Your building’s water heater should be inspected for proper temperature and obvious leaks. The safety valves and overflows should also be tested and all safety issues need to be addressed immediately.
All drains in your property should be tested for flow rate. Clogged or slow drains need to be unclogged or hydro jetted to restore their proper function. You may also want to consider a drain line camera inspection to ensure the drains are in good working order and don’t contain root infiltrations.
With a comprehensive plumbing maintenance checklist, your plumber will be better placed to assess your plumbing system. Another critical item that should be on the list is backflow testing. All large residential and commercial buildings need to have annual backflow testing to prevent water in the system from flowing backward and/or being contaminated with other substances and chemicals.